Design-validation prototypes
Check fit, access and interfaces before releasing expensive material or tooling.
Additive manufacturing
Print the learning before you machine the commitment.
Use industrial 3D printing to prove fit, reach, ergonomics and design intent quickly — then move into machined or fabricated production tooling with the same engineering team.
36 × 24 × 36 in
Maximum build volume
6 printers
Industrial and high-rate fleet
±0.005 in
Published XY tolerance
One team
Prototype through production tooling
Where we fit
Where additive creates the most manufacturing value
The value is rarely the printed part alone. It is the avoided machining hours, earlier design decision or operator problem solved before production hardware is released.
Assembly aids and nests
Produce ergonomic, part-protecting aids with geometry that is difficult to machine economically.
Inspection fixtures and gages
Create fast, replaceable aids for repeatable shop-floor checks.
Bridge tooling
Support pilot builds and launch timing while production tooling is being completed.
Proof before promise
Published additive equipment
- Industrial systems
- Markforged X7 and Stratasys F370
- High-rate systems
- Bambu Lab X1 Carbon, X1E and H2D
- Additional platform
- Cubify Cube Pro
- Transition path
- CNC machining, fabrication, assembly and inspection available in the same facility
How a quote starts
Send enough context to get a useful answer
-
01
Show the requirement
A drawing, model, marked-up photo, layout or statement of work is enough to begin.
-
02
Name the decision
Quantity, timing, critical features and acceptance requirements keep the quote focused.
-
03
Review together
We identify risk, missing data and the best process before committing your schedule.
Buyer questions
Straight answers before you send a print
When should we print instead of machine?
Print when the first goal is learning, fit, access, ergonomics or low-load function. Machine when material properties, tight tolerances, wear or production duty drive the decision.
Can Dynamics Group redesign a part for additive?
Yes. The engineering team can review geometry, orientation, supports, inserts and the eventual path to production.
What is the maximum published build volume?
Up to 36 x 24 x 36 inches, depending on material and process requirements.
Can you move a printed prototype into machined production?
Yes. Additive, design, CNC machining and inspection are available through the same team.
Have a print, model or tooling problem?
Send what you have. We will tell you where we fit, what is missing and the fastest practical next step.